Locate your main fuse box and look for the windshield wiper fuse and-or relay. The fuse will be a type of glass tube or a spade design. Visually inspect the fuse to see if the filament inside either type is internally disconnected or blackened. Replace the blown fuse.
Is there a fuse for the windshield wipers?
Before the wiper motor goes bad, you will probably experience a blown wiper fuse, which is intentional. The fuse is designed to be the circuits weak spot, which protects the wiper motor. Essentially, if your vehicle’s wiper motor is being overloaded, the fuse will blow to ensure the motor does not become damaged.
Which fuse is the wiper fuse?
Locate the windshield wiper fuse
The wiper fuse is usually located in the fuse box inside the passenger cabin.
What would cause your windshield wipers to stop working?
A torn windshield wiper is the most common cause of wiper malfunction. When the rubber edges on your wiper blades are torn, the wiper cannot move smoothly across your windshield and remove moisture or debris. This, of course, impairs your visibility and makes driving unsafe.
How do you tell if a fuse is blown?
Remove the fuse from its holder. In some cases you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.
How much does it cost to replace a windshield wiper fuse?
If your wipers come back to life, a blown fuse was the problem. Cost of parts: About $10 for an assortment of 100 fuses. Cost of professional labor: $20 to $50.
Why does my windshield wiper fuse keep blowing?
Interference. Another reason for a blown fuse for your windshield wipers and washers may be debris or ice built up around the wipers. Look around the wipers and see if there is anything that could be interfering with the arm movement, and remove it. Test to see if this was causing the problem.
What to do if wipers stop working while driving?
Car ownership 101: What to do if the wiper stops working
- 1) Don’t panic. If you are traveling at highway cruising speed and the wipers stop working, just relax. …
- 2) Keep distance. …
- 3) Use your senses. …
- 4) Pull over (at last) …
- 5) Diagnose the problem.
Where is the wiper relay?
In some vehicles, the wiper relay switch is inside the actual windshield wiper motor. If it fails, the entire motor needs to be replaced, as you can’t get parts to fix it.
How do you test a windshield wiper motor?
Use the fuse pattern shown on the cover and locate the wiper motor fuse. Test the fuse using your twelve volt test light. Clip the ground lead to a solid ground source and touch the positive lead to each side of the fuse. If the test light lights up on both terminals, the fuse is good.
How much does it cost to fix a windshield wiper motor?
You will pay between $230 and $310 for a windshield wiper motor replacement. The cost of labor on this job will be between $50 and $70, while the cost of parts should be between $180 and $250.