How do you wire a 12V trolling motor plug?

Feed the wires through the plug housing. On the 12-24V trolling motor plug, connect the positive 24V wire to the terminal marked “24”, the 12V wire to the terminal marked “12” and the negative wire to the terminal marked “-”. On straight 24V trolling motors, connect the two wires to “24” and “-” as appropriate.

Why does my trolling motor plug have 3 wires?

The three wire plug is for a 12/24V system. On a 12/24 you have a 12V hot, 24V hot, and a ground.

Which wire is positive on trolling motor?

The jumper wire used should be one size larger than the Trolling Motor lead wire. Connect positive (+) red lead (from motor) to positive (+) terminal on battery 2. Connect negative (-) black lead (from motor) to negative (-) terminal of battery 1.

Are trolling motor plugs universal?

Unfortunately, most trolling motor plugs and receptacles are not compatible with each other as there isn’t a universal plug design.

What size wire should I use for a trolling motor?

Many trolling motors can be used with 8 gauge wire, however, the length of wire you need and the amperage of your motor can alter the size of wire you need. For example, if you need a longer length of wire, you’ll likely need a lower gauge and therefore thicker wire.

IT IS INTERESTING:  Can you fix a dented bumper?

What is the orange wire for on a trolling motor plug?

The red wire is for the +12volt connection. The orange wire is for the +24Volt connection. So, back on the batteries, the black wire is connected to the – terminal of battery #2. The red wire is wired to the + terminal of battery #2.

Does a trolling motor need a breaker?

It is highly recommended that a circuit breaker or fuse be used when installing a trolling motor. … For motors requiring a 60-amp breaker, the Minn Kota MKR-19 60-amp circuit breaker is recommended.

Why does a trolling motor need a circuit breaker?

A trolling motor circuit breaker is designed to “trip” at a certain amperage, which breaks the circuit and prevents the motor from overloading and damaging itself.

Are 12-volt circuit breakers directional?

Are DC circuit breakers directional? Direct currents flow has one and one only ‘unidirectional’ flow of electrical charge one a constant direction, e.g. batteries or solar cells so the DC circuit breaker must respect that one direction charge. Reversing polarity would result in safety issues and irreversible damage.

Why does my trolling motor have 4 wires?

To make charging easier, the 4 prong/4 wire system became standard on several bassboats. This, in effect, moved the 4 battery post up to the boat side of the plug and configured them in such a way as the two negatives were side by side and the two positives were side by side.

Do you need marine wire for trolling motor?

Distance. DC voltage decreases as the length gets longer which increases the amperage. Amperage increase means you need thicker wire to handle the amperage draw from the trolling motor and the heat that the electricity produces. IMO, the best wire to use is marine grade.

IT IS INTERESTING:  Is there a fuse for the AC in a car?