Also, the C6 transmission was used in high-performance vehicles as well as trucks with more significant engines such as Ford trucks, passenger cars, and Lincoln cars. The C6 was evident in the Ford F-Series between 1967 to 1996 as well as the Ford Bronco between 1978 to 1991.
What engines fit a C6 transmission?
The C6 was used in trucks and cars with larger engines. Five different bell housing varieties exist for use with various Ford engine families: The Windsor pattern was used on the 300 I6, the Ford Windsor engines and the 351 Cleveland. The 460 pattern was used on the 351M and 400 and all of the Ford “385” engines.
Will a C6 transmission bolt up to a 302 motor?
Premium Member. The C6 will physically bolt onto either the 289 or 302 but I don’t think it will fit the 66 tunnel without some modification to the tunnel. It should fit the 68 tunnel fine, since a big block with a C6 was available that year.
What is the difference between a C6 and C4 transmission?
The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.
Will a C6 transmission fit a 351M?
This C6 Transmission is equipped with TCI StreetFighter components to handle up to 650 HP from Ford 351M/400/429/460 engines.
How much HP can a stock C6 handle?
According to Kokonis the company uses stock input shafts for applications up to 1,000 hp. Pushing past that limit requires the CK Performance billet input shaft. Other standard modifications are stronger C6 planetary carriers.
How do I identify a C6 transmission?
The bell housing gradually tapers down in size from the back of the engine to the center, or “body,” of the transmission. Look for a seam between the bell housing and the body of the transmission. If no seam exists, the transmission is a C6.
Will a C6 transmission fit a 289 engine?
This C6 Transmission is equipped with TCI StreetFighter components to handle up to 675 HP from Ford 289/302/351C/351W engines.
What transmission goes with a 302?
For years, the Ford C-4 automatic was a reliable three-speed automatic transmission for many Ford products, and is fine for most 289, 302 or 351 engines that have received modest modifications.
Will a 302 transmission fit a 351?
* All the parts from the 302 with the exception of the distributor and intake manifold will fit a 351w, but some of them may be undersized. * Motor mounts will be the same, exhaust will sit a little bit higher due to the extended deck height on the 351.
How many gears does a C6 transmission have?
This transmission was also designed to handle significant loads in order to be able to be used in the large engine variants of the F-150. The 3 gears selected for the C6 are identical to the gear set for the C4, with 2.46 for 1st, 1.46 for 2nd, 1 for 3rd and a reverse gear ratio of 2.18.
Does a Ford C6 transmission have overdrive?
The Ford C6 automatic transmission is a great example of this in the automotive world because it’s also the foundation of newer automatics in Ford trucks. … Adding overdrive to a C6 is physically impossible, but the 4R100 can donate its forward planetary gear set for shorter first and second gear ratios.
Is a Ford C6 transmission good?
The C6 is the strongest, most durable light duty automatic Ford has made. It was designed in the 60’s during the horsepower wars. The E4OD / 4R100 is not necessarily a “crap” transmission, it is based on the C6.
Will a Ford 460 bolt up to a C6 transmission?
For a small-block Ford, you’ll need an aftermarket transmission adapter plate to bolt up the big-block-style C6 case—or find a small-block C6 trans. … In production, Ford also used an adaptor plate that mates the 6.9L diesel to a 460-like bellhousing casting that in turn mounts to the transmission.