What cars had 3800 engines?

The GM 3800, 3.8-liter V-6 came in the Chevrolet Monte Carlo, Malibu, El Camino, Impala, Monza, Caprice, Camaro and Lumina. Chevrolet replaced the Buick version with another 3.8-liter V-6 version, based on the Chevrolet 305 V-8, from 1980 to 1985. But the Buick V-6 returned to power post-1985 Chevys as the GM 3800.

Why did GM discontinue the 3800 engine?

GM couldn’t get consistent quality from the difficult-to-cast aluminum blocks, so it dropped the engine after just two years. But the basic design and technology were resurrected for an iron block, a 198-cubic-inch V6.

What cars did the 3800 supercharged engine?

That said, you can find supercharged 3800 engines in the 1996-2005 Buick Park Avenue Ultra, the 1997½-2004 Buick Regal GS, and the 1996-1999 Buick Riviera, as well as various models from Pontiac, Chevrolet, and other makes within the GM family.

What year did GM stop making the 3800 engine?

1988-2003: The 3800 becomes GM’s workhorse engine. The engine grew to 225 cubic inches in 1964. Production stopped in 1967, and GM sold engine and production tooling to the Kaiser-Jeep Corp., the company that owned the Jeep brand.

IT IS INTERESTING:  Quick Answer: How do you know when to add transmission fluid?

Is a 3800 engine a good engine?

The 3800 is a great engine, powerful, reliable. I’ve had a 3800 Series II in an Impala (now for sale) and now a 3800 Series III in an ’06 Allure (just bought it last week)……

What engine replaced the 3800?

At the end of production, the LZ4 3500 OHV V6 replaced the naturally aspirated 3800 applications, and the LY7 3.6L DOHC V6 replaced the supercharged 3800 applications.

What is a Pontiac Fiero?

The Pontiac Fiero is a mid-engine sports car that was built by American automobile manufacturer General Motors from 1983 to 1988 for the 1984 to 1988 model years. … It was the first two-seater Pontiac since the 1926 to 1938 coupes, and the first mass-produced mid-engine sports car by an American manufacturer.

Are all 3800 Series 2 the same?

1 Answer. They are both series II’s, the engines are the same. GM updated the EFI on most vehicles between ’99-’00. … There are also some other small brackets and accessories that may need to be changed depending on what the ’97 engine is coming out of.

How much HP does a 3.8 supercharged have?

The supercharged 3800 Series III, found in the Grand Prix GT or GTP (depending on model year), unleashed 260 horsepower. The 3800 and 3800 SC Supercharged engines offered 230 foot-pounds of torque at 4,000 RPM and 380 foot-pounds of torque at 5,200 RPM, respectively.

How much HP does a 3.8 V6 have?

An Awakening… In box stock form, the 3.8L Essex V-6 produces 145-150 hp at the crankshaft. According to Super Six Motorsports, that’s 0.625 hp per cubic inch or 38.2 hp per liter.

IT IS INTERESTING:  Quick Answer: Does speed affect mileage in an electric car?

What size engine is a 3.8 liter?

From Wikipedia, the free encyclopedia

90° V6 engine
Displacement 200 cu in (3.3 L) 229 cu in (3.8 L) 262 cu in (4.3 L)
Cylinder bore 31⁄2 in (88.9 mm) 3.736 in (94.9 mm) 4 in (101.6 mm)
Piston stroke 3.48 in (88.4 mm)
Block material Cast iron

Is a 3.8 L V6 good?

The 3.8 liter V6 was a conservatively designed, wider-bore, longer-stroke version of the then-new 3.3-liter V6. It was a good, solid engine from the start – not the highest performer or the lowest, but relatively quiet, driveable, and reliable.

Premium Member.

Category 3.8 Liter
Fuel ​ Regular (US: 87 octane)

How much horsepower does a 3800 Series 2 have?

Power is up to 240 hp (180 kW) and 280 lb·ft (380 N·m) of torque. Final drive ratios are reduced in most applications, for better fuel economy and more use of the engine’s torque in the low range. The engine was built in Flint, Michigan.

Is Buick 3.6 a good engine?

The 3.6L LLT delivers a market-leading balance of good specific output, high torque over a broad rpm band, fuel economy, low emissions, and first-rate noise, vibration and harshness control, with exclusive durability-enhancing features and very low maintenance.