Where do I find my Ford transmission code?

Look for the front rail of the trans case where you should find the VIN. It could also be along the front rail. Find the transmission ID tag on the top surface of the transmission or under a servo bolts on the transmission.

How do I identify my Ford transmission?

The prime identification source is the pan located on the bottom of the transmission; its shape and bolt count is indicative of which model transmission is present.

  1. Inspect the pan found on the bottom of the transmission. …
  2. Count the number of bolts on the transmission pan.

Where is the transmission transmission code located?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

How do I find my transmission ID number?

Another way is to crawl under the vehicle and look for part numbers. Using a good flashlight, look for part numbers stamped into the transmission pan or the transmission itself. Your local auto part store or dealer will be able to cross-reference the numbers to determine the kind of transmission the part belongs to.

IT IS INTERESTING:  What is the most expensive engine repair?

How do I identify a Ford AOD transmission?

Another way to identify the transmission is by the driver’s door tag. Ford lists their transmission codes on their Vehicle Certification Label and these are a single letter located along the bottom of the label under the abbreviation TR or TRANS.

What is a transmission code?

When a vehicle’s “check engine” light comes on, it means that the Onboard Diagnostic System (OBD II) has detected a malfunction that may cause emissions to exceed the maximum allowable by law. The OBD II sends one or more trouble codes to the vehicle.

Can I tell what transmission I have by the Vin?

Simply write the VIN number down and you can then ask a dealership service department, auto repair shop, or auto parts retailer to help you identify the transmission. They’ll easily be able to find the specs by plugging the VIN number into the computer.

Will transmission problems throw a code?

Once the Onboard Diagnostic System (OBD II) within your vehicle detects a problem related to the transmission, it will send at least one transmission code to the vehicle. … However, the second character in the code will help you determine if it is global or manufacturer specific.

What does code po700 mean?

Many cars have a control module for the automatic transmission called the transmission control module (TCM). … The trouble code P0700 is set whenever the TCM detects a malfunction with the transmission controls.

What does the 8th digit of a VIN mean?

Vehicle Description Section

The fourth through eighth digits describe your vehicle’s model, body type, restraint system, transmission type, and engine code. The ninth digit is the check digit, which is used to detect fraudulent VINs.

IT IS INTERESTING:  You asked: Who is covered under vehicle insurance?

How do I know if I have a CVT transmission?

A tell-tale sign of a CVT is this: When you accelerate watch your tachometer. As you accelerate with a regular geared transmission it will climb gradually and then suddenly drop as it changes gear. You should see this happen a few times (5 or 6 up to highway speeds is typical).

How do I know if I have a 4L60E or 4L65E?

The two transmissions cannot be differentiated from the outside. The 4L65E shares the same exterior parts but have stronger internals such as 5 pinion planets compared to 4 in the 4L60E. 4L60E uses a 6.5″ depth bell with 6 bolts for non gen 3 LS applications and a 7″ depth bell with 7 bolts for LS applications.

What is the difference between AOD and AODE transmission?

Ford later introduced the AODE, a computer-controlled version of the AOD. … The AODE and 4R70W differ from the older AOD by an attached cable, allowing computer control. The AOD transmission is identified visually, first to identify the AOD, then to differentiate between the AODE and 4R70W transmission.

What years did Ford use the AOD transmission?

The AOD was introduced for the 1980 model year and used in the 1980 to 1986 F-150, 1982 to 1993 Ford Bronco, and many Ford passenger cars. It was Ford’s first 4 speed overdrive transmission and was used to replace many of their 3 speed transmissions (C4, C5, etc).