To find such information, every 302 has a serial number stamped into the passenger’s side of the engine.
How do I find my Ford engine number?
Generally, on both 8 and 6-cylinder Ford engines, the engine number is towards the rear of the block on the passenger side.
How do I decode a Ford 302 casting number?
How to Decode a Ford 302 Casting Number
- Decode the first character letter. Ford casting numbers always start with a letter for “Decade,” according to Classicmustang.com. …
- Decode the second number. …
- Decode the third character. …
- Decode the 4th digit. …
- Decode the next four characters.
Where are the casting numbers on a Ford engine?
Illuminate the section of the block where Ford stamped the casting number. This is directly beside the starter mount, where the starter motor bolts to the engine. Write down the casting number down with pen and paper.
How do I identify a Ford 302 crankshaft?
The 302’s cast-iron crankshaft, first available in 1968, is identified with a “2M” cast into the forward-most counterweight. Newer 5.0-liter crankshafts are identified with a “2MA” on the journal.
How do you read a Ford serial number?
Read the first two digits in the identification tag to find the year the engine was made. This will be a letter. If the letter is a “B,” it means that the engine was built in the 1950s. Each decade after that has its own succeeding letter; “C” designates the 1960s, “D” designates the 1970s, and so on.
How do I find my engine number?
The engine number is stamped on the engine block. Since the engine number location varies by engine, you will need to refer to the Specifications section of your Owner’s Manual to find a picture of the relative location of the engine number on your vehicle.
What is a vehicle engine number?
Engine numbers are usually stamped into the engine block – the core of the motor and the hardest part to remove from a motor vehicle – rather than stamping identifiers on engine parts which can be easily removed.
Where is the serial number on a motor?
The engine serial number is on a metal plate attached to the block, typically found on the left-hand side of the engine. The position of the engine plate varies across different engine series.
How do I identify a Ford industrial engine?
Common locations include the rear of the engine, near the starter mount and bellhousing, on the front of the block’s right side (when looking at it from the front), on the left side of in-line-cylinder engines, or by the oil filter mount. “C8NN-6015-J” is an example of a Ford part/casting number.
How do you decode a Ford engine block?
Look at the first digit of the Ford block date code, which appears like a four-digit code, sometimes with a fifth digit representing the engine size or horsepower. The first number represents the decade year. For this example, in a four-digit code of “5E30”, “5” means 1995 when appearing as the first digit.
Is my Ford 302 a Windsor?
The 302 was manufactured in Windsor from 1968 to 1978.
Where do I find engine block casting numbers?
The block casting number on smallblock and big block Chevy V-8 motors is located on a ledge found at the rear of the block, most often on the driver’s side. This ledge is below the deck of the block and the ledge forms the mating surface between the block and the transmission bellhousing.
How do I identify a 302 Ford head?
Look for three different locations where your Ford cylinder head code number will be located: on top of the head under the valve cover; on the bottom of the head, requiring the head to be removed; and on the side of the head just under the valve cover lip.