What do Briggs and Stratton model numbers mean?
Briggs & Stratton Model Number Locator. … The number model system consists of three series of numbers. The first number you find will be the model number, the second number is the engine type and the third number is the code number.
How do you read a Briggs date code?
How can I determine the age of my engine if it was made after 1965?
- The first two digits (99) denote the year of manufacture. …
- The next two digits (01) are the month of the year, which is January.
- The following two digits (15) are the day of the month. …
- The final two digits designate the plant and assembly line.
How can I tell what model my Briggs and Stratton engine is?
How Do I Identify a Briggs & Stratton Engine? The Model, Type and Code numbers, stamped directly into the engine, are used to identify our engines. Engines used in lawn mower applications usually have the model numbers stamped directly into the blower housing, muffler heat shield, or a few inches above the spark plug.
How do you read engine serial numbers?
Engine Serial Number composition
- the list number or build list, typically 2 to 4 letters followed by 4 or 5 numbers.
- a letter identifying the country.
- a series of numbers showing the build line, also called a serial number.
- a letter indicating the year of manufacture.
What HP is my Briggs and Stratton engine?
Where can I find my engine’s horsepower or torque rating? You can find the gross horsepower or torque value labeled on your engine. To find an engine’s horsepower, look for a number with “HP” or “cc.”
How can I tell what year my engine is?
The engine will have a alphanumeric casting number on the passenger side (right side) of the block, under the heads. The first letter of the code identifies the decade (C=1960s, D=1970s, E=1980s), the second digit in the code identifies the specific year.
How old is my mower?
By locating the serial number tag on your machine, you can easily determine your mower’s age. If you have the owner’s manual for your mower, you can also check the date printed on the inside of the manual. This date should be one year after the mower’s manufacture date.
How do I find the manufacture date of my engine?
Make sure your engine is turned “OFF” and has cooled sufficiently to allow handling. Locate the engraved serial number on the side of the crank case. The Date of Manufacture (DOM) indicator may be found within the engine’s serial number. Locate the first four digits (all numbers) of the serial number.
Where is the part number on a Briggs and Stratton carburetor?
Where can I find my engine’s part numbers?
- Your Briggs & Stratton engine part numbers can be found in your engine’s Illustrated Parts Lists (IPL). …
- The numbers listed next to the part illustrations in our IPLs are called Reference Numbers.
When did Briggs and Stratton stop using points?
Magnetron Ignition – This solid state ignition system introduced by Briggs & Stratton in 1982 eliminated the points and condenser system, the performance of which steadily degraded between required periodic maintenance service.
Where is the engine model number?
The engine model number is generally a number stamped into metal directly on your engine . Some push mower engines come with a cover or “shroud”.
Where is the part number on a Briggs and Stratton starter?
For most Briggs and Stratton engines, the model, type, and code numbers are located on the air shroud. The model number tells a mechanic many things about the engine; its displacement, whether it is a horizontal or vertical shaft, the type of starter, and other things.
Why does my Briggs and Stratton engine backfire?
Common Causes of Afterfire:
Shutting off the engine at high RPM, causing fuel to pump through the engine for ignition. Gasoline that contains alcohol has a tendency to ignite easier, which can cause afterfire. … Carburetor adjustment may not be properly set for correct engine performance.