# How is electric motor torque calculated?

Contents

To calculate load torque, multiply the force (F) by the distance away from the rotational axis, which is the radius of the pulley (r). If the mass of the load (blue box) is 20 Newtons, and the radius of the pulley is 5 cm away, then the required torque for the application is 20 N x 0.05 m = 1 Nm.

## How is torque calculated for a DC motor?

Torque or moment or moment of force is the tendency of a force to rotate or move an object about an axis. A force is a push or pull, likewise, torque is a twist to an object. Mathematically, torque, T = F × r.

## How is torque calculated?

The magnitude of a torque about a fixed axis is calculated by finding the lever arm to the point where the force is applied and using the relation |→τ|=r⊥F | τ → | = r ⊥ F , where r⊥ is the perpendicular distance from the axis to the line upon which the force vector lies.

IT IS INTERESTING:  Quick Answer: What does a full service on a vehicle include?

## How much torque does a 1 hp electric motor have?

The 1800 RPM, 1HP motor produces 3 ft. lbs of torque at 1800 RPM. The 3600 RPM, 1HP motor produces 1.5 ft. lbs.

## How is motor torque calculated?

How to calculate torque of motor:

1. Torque is nothing but a momentary force developed at the time of force is applied to the motor. The unit of torque is N.m (Newton-meter). …
2. T = V x I x pf / (2 x pi x N(rpm) / 60)
3. I => Input AC Current in amps.

## How is torque calculated in an AC induction motor?

Torque of a three phase induction motor is proportional to flux per stator pole, rotor current and the power factor of the rotor. T ∝ ɸ I2 cosɸ2 OR T = k ɸ I2 cosɸ2 .

## What is the torque of a motor?

Torque: The torque output of a motor is the amount of rotational force that the motor develops. The torque of a small electric motor is commonly measured in either inch pounds (in-lbs), Newton meters (N-m) or other directly converted units of measure.

## How do you calculate maximum torque of a motor?

Calculate torque (T) using the formula T = 5,252 x horsepower/rpm. The results are measured in pound-feet. For example, if you have a 40-horsepower motor designed to operate at a peak of 1,200 rpm, the formula would be T = (5,252 x 40)/1200 = 175.07 lb. -feet.

## How do you calculate torque from HP and rpm?

Mathematically, horsepower equals torque multiplied by rpm. H = T x rpm/5252, where H is horsepower, T is pound-feet, rpm is how fast the engine is spinning, and 5252 is a constant that makes the units jibe.

## How much torque does a 7.5 HP electric motor have?

This electric motor has 141 ft lbs of torque, which is more than 6 times the gas engine (22 ft lbs of torque).

IT IS INTERESTING:  How fast does a 540 motor go?

## How much torque does a 1.5 hp motor have?

Electric motor output power and torque vs. rotation speed.

Power Motor Speed (rpm)
1000
2 1.5 10.5
3 2.2 15.8
5 3.7 26.3

## Why do electric motors have more torque?

The benefit of using an electric motor to power a car is that it can help drivers reach maximum torque from 0 RPM. This is because electric motors use an electric current, which moves through a magnetic field and creates the force necessary to rotate the armature and get the car moving.

## How do you calculate torque from kW?

Kilowatt is a function of torque and revolutions per minute and is calculated as following: Power (kW) = torque (Nm) x speed (revolutions per minute, or RPM) / 9.5488.

## How do you calculate the RPM of an electric motor?

How to Calculate Motor RPM. To calculate RPM for an AC induction motor, you multiply the frequency in Hertz (Hz) by 60 — for the number of seconds in a minute — by two for the negative and positive pulses in a cycle. You then divide by the number of poles the motor has: (Hz x 60 x 2) / number of poles = no-load RPM.

## How do you calculate maximum torque?

Torque on the loop can be found using τ=NIABsinθ τ = N I A B sin ⁡ . Maximum torque occurs when θ = 90º and sin θ = 1.